This stock was designed for the long-range hunter. Depending on the inlet, the standard weight with a ½” decel pad is 26 to 28 ounces. The forend is 1.75” wide at the tip and rounded to a beaver tail that is flat and wide enough to accept a #8 barrel which is about 1.125″ diameter at the tip of the stock. The grip on the stock is more of a vertical tactical style, that is longer than standard with a small palm swell and overall smaller grip than the MCS-T4 stock. The bottom of the butt has a flat that is about ¾” wide that is true running with the sides of the stock. This allows it to ride very straight and true when using a rear bag. Below you can see an example of our new 28 MCR bedded to one of these! Or see what it can do by going to our Facebook page. McWhorter’s Facebook.
Stiller action bearing our name, with helically fluted bolt, side bolt release, M-16 mod extractor, 8/40 holes. Hart #5 contour Match Fluted barrel 26″ + our custom muzzlebrake. Manners – EH1 stock (w/ mini chassis) – custom polane painted in Shadow Brush Scheme, Sniper Gray Cerakote on all metal surfaces for the ultimate in weatherproofing. PTG machined floorplate, Jewell trigger set at 1.5 lbs. Rifle shot sub-1/3MOA average during load development and testing with Berger 180 VLD-Hunting bullets. All our rifles are GUARANTEED 1/2″ MOA and come with barrels completely broken in, load dev complete, load data, talley mounts, and a hardcase for shipping. NightForce scope shown NOT included.